Is the capacitive touch screen support touch with gloves?

Yes, JuTouch capacitive touch screens can support touch operation while wearing gloves, with reliable performance for gloves up to approximately 5mm thick under suitable conditions. Whether glove touch works well depends mainly on two factors: the thickness of the cover glass on your touch panel and the material of the gloves being used. Thicker cover glass increases the sensing distance between your finger and the sensor electrodes, so the touch controller must have sufficient sensitivity to detect the weaker signal; our engineering team evaluates this relationship carefully and can select a high-sensitivity touch controller and tune its firmware to maximize glove-touch performance. As for glove materials, conductive elements or thin, snug-fitting gloves generally work best, while very thick insulated gloves (such as heavy winter work gloves) may require specific controller configurations or alternative sensing modes to respond reliably. To ensure the best possible experience, we recommend that you provide us with your actual glove samples, cover glass specification, and intended operating environment, so that our engineers can run feasibility tests and optimize the solution—including controller selection, sensor tuning, and firmware calibration—accordingly. For many industrial and medical applications, we can deliver glove-touch support with gloves of 1mm to 5mm thickness, and in some cases up to 10mm with specially tuned configurations, while still maintaining normal bare-finger touch performance. We can also combine glove support with other advanced features such as water rejection, palm rejection, and high noise immunity, ensuring reliable operation in demanding workplaces like factories, cold-storage facilities, laboratories, and outdoor field operations. To discuss your detailed requirements and get a tailored recommendation, please contact our sales department—we will evaluate your application and propose a suitable, cost-effective solution.